Annke Vision - How to Access the IP camera's setting page through the NVR?

Super Admin
03 May 2026
0 views

Applies to:  N48PI/N44PI/N46PI/N44PAM/N48PAW/N46PCK/N88PCH/NCK800/H800/H500

 

Purpose: Sometimes you need to configure the settings of the IP cameras separately via the NVR. You can follow the guide to do some setting.

Here are the steps for you:

  1. Connect your computer to the same network as the NVR. Then access the system menu of the NVR on the monitor or TV screen and go to 'Configuration→Network→General to find the NVR`s IPv4 address.

  2. Type in the IPv4 address of the NVR in the web browser, then go to the Configuration--Network--Advance settings--Others, then tick on the "Enable Virtual Host".

    HK_NVR_IE_browser_login.png

    HK_NVR_IE_browser_setting_page.png

  3. Go to Configuration--System--Camera Management, you can find there is a URL link for each camera. Click the link, then you can directly go to the camera`s setting page.

    HK_NVR_IE_browser_Camera_Management.png
  4.  The user name is admin. The password is the NVR's password.
    HK_NVR_camera_page_login.png

Was this article helpful?

Bu bilgiler sorununuzu çözmeye yardımcı oldu mu?

Still need help?

Uzman ekibimiz size yardımcı olmak için burada.

New Ticket