Annke Vision-The Introduction of The Different Light Modes of Smart Dual Light IP Camera.

Applies to:  I51EM/I51EL/I51EN/I51EG/I51EH/I91DL/I91DM/I91DF/

Purpose: Help customers understand the meaning of four supplement light modes

Note:
1) This is only for the smart dual-light IP camera.

2）Please choose the light mode you like in the web interface of the camera.

Please access the web interface of the camera:

If you use the camera alone, please follow the link below:
https://help.annke.com/hc/en-us/articles/900003867006

If you connect the camera to the NVR, please follow the link below:

https://help.annke.com/hc/en-us/articles/900006140806

Introduction:

1、The smart light mode:

When enabling the smart mode, the camera maintains infrared illumination until an event triggers color. imaging to capture critical details.

Kindly note that our camera is in smart mode by default.

When there is no vehicle or person, the camera uses only the infrared light

When a vehicle or person appears, the white light is automatically triggered, resulting in vivid color imaging with clear details；
When the vehicle or person leaves, the camera switches back to the infrared light

The detailed steps to enable smart mode can be found at the following link:

https://help.annke.com/hc/en-us/articles/24743902999705

2、The IR supplement light mode

When enabling the IR supplement light mode, the IR light will keep on and the night vision of the camera will be black and white which usually results in loss of details.

3、The white supplement light mode

When enabling the white supplement light mode, the white light will keep on and the night vision of the camera will be full color.

But when the light is always on, it might be disturbing

4、OFF

When the supplement light mode is off, the night mode will be also black and white but the quality of the night vision will be poor without the supplement light.

If you have any problem, please contact our technical support at support@annke.com.