CVI5000 | Program Port 1 output

Environment:

• CVI5000 (LCD monitor)
• Monitor (Port 1 HDMI)

Procedure:
Follow the Article linked to 1st time set up the CVI5000 Rise | Add to CVI5000 Keyboard

1. Confirm all connections have been made.
2. Open a web browser and type in the IP address of the CVI5000.
3. CVI5000 login will appear ( Default username: admin password: 12345)
   
   
4. Click on the "Decoder Management" Menu.
5. Click on the "Output Port" sub-menu, then select your "Window Mode" display from the drop-down list. Note: Once selected you should see Port 1 output change to selected displayed. 
   
   
6. Click on "Decoder Set" and Confirm the Window number. 
   Note: Windows-10x will display Port 1 output. | Windows -201 will display on the LCD.
   
   
7. Click the "Camera" Menu then click on the "Camera List" sub-menu to confirm Logical No.
   Note: The Logic number is unsigned to the camera number that will be used to display the camera. 
   
   
8. Log into the keyboard as user: 1 Password: ( enter new password that was created)
   
   
9. Press "0" then "Mode" on the keyboard to switch the current mode to the active decoding mode as shown below.
   
   
10. Display camera on LCD: Press 1 CAM. Image below
    
    
11. Display Cameras on Port 1 (Monitor): Press the "101" "Win" key then 1 Cam. Notice Cur WIN=101 changes on the Keyboard. Image below:
    
    
12. Cam 1 will display W101 on the Port 1 Monitor as seen below:
    
    
13. Example: To Switch the camera on any windows Press 101,102,103 "WIN "etc.. press the camera # then "Cam". To Switch the camera on the LCD monitor. Press 201 "WIN" Then the camera # CAM key.