• Power off the camera.
  • Insert the SD card into the designated camera slot.
    • Check the camera's spec sheet to verify the maximum SD card size
  • Power the camera back on.
  • Use the Speco Blue Scanner to locate the camera on your network.
    
    
    
    
• Open a web browser and enter the camera’s IP address.
• Log in using:
  • Username: admin
  • Password: 1234 (default)
    
    
    
    
• Click the Config tab (top left corner).
  
  
  
  
• Navigate to the System tab.
• Click Storage then Format the SD card.
  • Once formatted, the card will show a Normal status.
• Click on the Record tab to manage your recording parameters
• Click on the Snapshot tab to manage your shapshot parameters
  
  
  
  

• Playback Recordings from SD Card in Web Interface

• • Click Config (top left).
  • Click Search (top left).
  • Use the filters to review recordings stored on the SD card.
    
    
    
    

Initial submission Date: July 2, 2025

Article authored by: Tim O'Brien, National Trainer

Article transcribed by: Christopher Cataldo, Technical Support Lead