The necessary steps to install a SIP firmware in a X-Security Video-intercom, 3211 series are presented in the following article.
This procedure concerns devices XS-V3211E and XS-3211E-MB4.
If you have any doubts about how to use VDPConfig, please follow this FAQ.
Requirements
Using the VDPConfig
Check that the Video door phone has the version V3.200.0012001.0. (If not, please install it first).
1 - FIRST STEP
Download the SIP4 firmware pack FOR 3211 SERIES.
First install 1_FIRMWARE - 3211.bin
The device is going to reboot.
Now install 2_FIRMWARE - General_VTO3211D_Eng_P_SIP_V4.300.0000000.4
After the installation of the SIP firmware, we recommend resetting it to factory settings and reconfiguring it; the device will be inactive and will have to be activated from the VDPConfig.
XS-3211E-MB1
For the MB1 the procedure is the same but the firmware is different.
Firmware for the XS-3211E-MB1.