KB - Control4 Driver Installation (User)

Super Admin
02 May 2026
0 views

Perry's C4 Driver Note:

v1.1 20191003

PTCloud Encryption requires Disabled.
Driver support Video Link only. No Audio/Notification Linkage.


Improvement / Changes:
====================================================================
1. Support Digest authentication

2. Increase CH# support up to 32CH.

3. Property Panel is simplified. Remove all not effect settings.

4. Driver 3-in-1 (NVR/DVR/IPC) auto identify the driver type

5. Third Stream is supported (if your device is supported) and
C4 driver can auto-identify the IP Camera and set to CAMERA_FIXED.
When it defined as CAMERA_FIXED, the channel# field will be locked.

6. Snapshot URL command has been modified. When you have tablet C4,
you need to watch out this section. NVR/DVR and IPC command are different.
NVR/DVR require to verify the ONVIF user account existing before use it.
IPC still using the same commend how it works.
NVR/DVR uses ONVIF and IPC uses the older ISAPI method.

7. IP Camera MJPEG driver has been disabled.

Was this article helpful?

Bu bilgiler sorununuzu çözmeye yardımcı oldu mu?

Still need help?

Uzman ekibimiz size yardımcı olmak için burada.

New Ticket