[AW-GET-094A-130]How to set VLAN and port trunk?

Super Admin
24 Jun 2026
108 views

QUESTION

I have two switches AW-GET-094A-130. How to setup two VLAN and port trunk for the two switches?

For switch 1
1. VLAN 11 for camera (port 1, 2, 3, 4)
2. VLAN 42 for management(Port 5, 6, 7)
3. Port 8 Trunk

For switch 2
1. VLAN 11 For camera (port 1,2,3,4)
2. VLAN 42 For management(port 5, 6, 7)
3. Port 8 Trunk

I want switch 1 VLAN 11 can talk with switch 2 VLAN 11 and switch 1 VLAN 42 management can talk with switch 2 VLAN 42 management, see Architcture.png.
 

ANSWER

Please follow below steps to set VLAN and port trunk for each switch.
Step1: Connect your PC to any of port 1-4 of the switch to open switch web UI.
Step2: Set VLAN mode to "Tag-based".
rtaImage_-_2021-05-09T121403.649.png
Step3: Create a VLAN group "42" and then click "modify" to enable port 5-8.
rtaImage_-_2021-05-09T121450.897.png
Step4: Create a VLAN group "11" and click "modify" to enable port 1-4 and port 8.
rtaImage_-_2021-05-09T121456.407.png
Step5: Click "port config" to set port 5-8 as below. Note that port 8 is for trunk.
rtaImage_-_2021-05-09T121500.563.png
Step6: Modify "Management VLAN" to "42".
rtaImage_-_2021-05-09T121504.144.png
Step7: Connect your PC to any of port 5-7 of the switch to open switch web UI.
Step8: Click "port config" to set port 1-4 as below.
rtaImage_-_2021-05-09T121508.694.png
 
 

Was this article helpful?

Bu bilgiler sorununuzu çözmeye yardımcı oldu mu?

Still need help?

Uzman ekibimiz size yardımcı olmak için burada.

New Ticket