Annke Sight - How to Add Cameras to NVR?（For N48WHR New UI）

Applies to: N48WHR New UI

Purpose:
Wireless NVR should connect the IP cameras to get and record the video. In order to get a live view or record of the video, the IP cameras should be added to the connection list of the device.

Please connect the camera to the socket with a power supply. And then please connect the NVR to the socket with a 12v2a power supply. 

Please note that the distance between the camera and the NVR should be within 1 meter when connecting. You can install the camera to a farther location after connetion success.

1. Please right-click the mouse and click camera, then go to camera set up and click add camera. Then please power on the cameras according to the instructions.

2. You can also add camera to NVR in the method below.

Please click plus icon to add camera in a channel that are not connecting with the camera. Then you can access the same page above to power on the cameras.

3. You can choose either continue or manually to add cameras.

If you choose continue, you can see the NVR is searching for the camera automatically. And please note that do not click continue until all cameras are listed.

4. If all the cameras are listed on the right corner, please click continue to add cameras. Then you can see the camera's status shows "Connect success". Then you can click continue to see the live view of the cameras. 

If you do not see a camera's Live View, please click 'Search again'.

5. If you choose Maually in the step 3, you can see picture below. Please click search to find the cameras and then click plus icon to add cameras. If you want to add all the cameras to your nvr in one time, please click Add all. Then you can see the camera's status shows "Connect success" in the chart below.

6. Now, you can see the camera's image on the TV or monitor.

Note: If the camera cannot be found, please reset the camera and try again. Or connect the camera to the LAN port of a wifi router (same router with the NVR) by an ethernet cable , and then try to add camera to NVR.

Here is a link for your reference.

Annke Sight-How to Add a Camera to NVR with an Ethernet Cable? (For N48WHR New UI)