Annke Sight - How to Connect System to Annke Sight Software on Computer?

Applies to: NW41V/N441H/N441K/N28WEB/N441B/N441D/N441L/N44PAN/N44PAJ/N34WDB/N34WDD/N44WEB/N44WED/N44WEC/NW41V/N44WBD/N48WHP/N44WEE/N48WHR

Purpose: This instruction will help you how to view cameras on the computer by Annke sight software.

Steps:

1. Power on NVR and connect the recorder to the router by Ethernet cable.

2. Go to System setup---Network setup to check if P2P is online. It must be online if you want to remote view.

If it is offline, please refer to the link below to make it online at first. 
https://help.annke.com/hc/en-us/articles/360000253982-

3. Download Annke Sight and install it on your computer. Here is the software download link.

For Windows PC:

https://download.annke.com/software/JA/Annke_Sight_Setup_3.0.7.10.exe

For Mac PC: 

https://download.annke.com/document/Computer_Software/Annke_Sight_mac_2.0.8_20210417.dmg.zip

4. Please run the Annke sight, then it will pop up on the login page.
There are two ways to log in to the software.

1) Login Local: The default user name is "admin", and the default password is empty (means you don't need to input anything). 

2) Login Cloud:  Please log in with your cloud account (the account you used to log in to the phone app Annke Sight).

If you don't have Switch to Login Local option, please enter username as admin and then press login with empty password:

5. Tap Add on the right-top of the interface, and the Add Device window will pop up.

6. Add your NVR by following the below pictures, and tap Finish to add the device.

7. Please click your device on the "Device list" and then click the camera channel to play the live view: