DC-S6xxxx | How to Factory default setting.

Environment:

• DC-S68xx Series
• DC-S66xx Series 
• DC-S64xx Series
• DC-S62xx Series

Procedure:

Note: Only use the factory reset button to restore the camera to its factory default settings. 
          A factory reset will clear all camera settings configured by the user.

1. Shut off the power supply.
2. Press and hold the reset button down.
   
3. Hold the button down and reconnect the power.
4. Once the device turns back on, wait 5 seconds, and then release the reset button.
5. The device will go through the resetting process and reboot. All camera settings will be restored to their factory defaults after the reboot.

Note:

It's also possible to do a factory reset by pressing and releasing the reset switch while the camera is turned on or using the IDIS Discovery program from a remote location. A factory reset will
Reboot the system.