DR-Series | DC-I6212WRX trigger devices

Environment:

• DR-Series
• DR-I6212WRX 

Procedure:

Diagram setup:
Note: External devices require their own power source

1. Go to the "Setup" icon on the front panel console.
   
2. Click on DEVICE>Setup>Source and select the Camera" "Channel (camera #)" Sub Channel 1"
   
   
3. Click "Apply" to save.
4. Next Click Event>Additional Event>Setup Click the plus 
   
5. Click "Ok" to add
   
6. Click on the "Action" field, then "Alarm-Out"
   
   
7. Check  1 AO 1 (uncheck if lock will be open manually ) and NVR AO 1, Then Click "Ok"
   Note: (AO-1 camera- N/O) (NVR AO 1 N/O on the NVR)
   
8. Click "Apply" to save the setting. 
   
9. Test by pressing the door button.