IDIS Center | Add devices

Environment:

• IDIS Center
• DR-Series
• TR-Series
• 20XDI
• 25XDI 
• 25ET

Procedure:

1.  Click on the IDIS Center shortcut on your desktop.
2. Log in if prompted (this password was set up when installing software on this pc)
3. Click on System>IDIS Center Setup>Device
   Note: Ctrl+Shift+D 
   
4. Click the 2nd Plus symbol.
   
5. Set the Protocol to "IDIS" and Scan Mode: Auto Scan (Lan), then click "Start Scan"
   
6. Locate the Device (Recorder) that will be added to the IDIS Center for remote viewing.
7. Check the Device you want to add, then click on 'Add Devices" and enter "ID" and "Password"
   Note: the user and password are what are used when logging onto the front panel console.
   
8. If successfully added, you will see "Registered"
   
9. Close out menus 

10. Under the Site list, Left-click and drag the Device over to the viewing panel.