PTZ Setup

• If you press button 1 + set for 2 to 3 seconds, you can enter into the PTZ setup menu.
• Input : the password (factory default 0000)
• Address: input the camera address (1-255)
• Model : (find the camera which user want to control by the joystick
• Baudrate: (set the baudrate of the camera)
• Parity: none(set the parity none/even/odd)
• Prop: on (set the camera speed)
• Save : save (the settings)
• Exit : exit (PTZ setup menu)

Main Setup

• If you press 2+set for 2-3 seconds, you can enter into the main setup.
• Main setup: enter the password(factory set:0000)
• Version: show the software version and date.
• Date: shows the current date.
• Title Set: ACB enter the title.
• Control ID: ID number can be changed.
• DVR SPD: 24KBPS-57.6KBPS
• Backlight: auto
• Sleep: setting to save power in the standby mode (off by default)
• Buzzer: (on by default)
• Terminate: (on by default)
• Joystick SPD: select the joystick speed from 50ms to 300ms.
• Mouse SPD: mouse speed setting when operated with DVR.
• Password: change the password if needed.
• Factory Setup: you hit yes if you want to go back to factory settings.
• Save/exit: no or yes after you make changes.

Initial Publish Date: Feb 6, 2024
Published By Tim O'Brien