Slave monitor configuration on Android monitor

Note:

This tutorial is made with SF-VIDISP05-10WIP-A

make sure the main monitor of the indoor station is online and working!

1. Connect the PoE Ethernet cable (Power over Ethernet) on the monitor
2. On the welcome screen, the monitor will prompt you to create a password
3. Enter the password and confirm the password in the second field
4. Select the language
5. Then, next to Network Settings
6. Select DHCP or Edit network address (or Skip when the IP address is already correct)
7. Click on > to go to the next field
8. When finished, click Next
9. In the first field, select Inside Extension
10. The second field, the extension number. When it is the first extension, it should be 1
11. Enter the registration password(this is not step 3 of the password form), it must be the same as the one for the master monitor
12. Select the indoor station(master monitor) verify the master serial number
13. Then click Finish