For a Wifi IPC
Follow these instructions:
Manual Setup for WiFi Cameras with WiFi Router
http://www.ltsecurityinc.com/knowledge-base/index/manual-setup-for-wifi-cameras-with-wifi-router.html
The Process for a New Wifi IPC
Hardwire the IPC to the network
Use IP Portal to activate the IPC and give it an IP Address on the Network
This will be the IPC Hardwired IP Address (LAN)
Log into the camera on the internet browser,
Go To
Configuration > Network > Advanced Settings > Network > WiFi
Select your WiFi SSID and type in WiFi password
Click 'save' to connect camera
Give the Camera some time, Refresh IP Protal
If the camera connects to the Wifi successfully it will appear in IP Portal a second time with a second IP Address.
This is the IPC Wifi IP Address (WLAN)
Use the IPC Wifi IP Address (WLAN) to add the IPC to the NVR
For Wifi Camera, it is always recommended to log into the Router, and Reserve the IP Address for the Wifi IPC
Note -
For a Device with multiple ways of connecting to a network (Hardwire & Wifi),
Each of those Connections has its Own MAC Address, and will receive its own IP Address