XDI | Adding a PVM (CMC26LEDPVIP)

Super Admin
20 Aug 2026
325 views
  1. Download and install the IPSearch software attached at the end of this article.
  2. The PVM may have a default IP address of 192.168.0.129. Put your PC IP address to 192.168.0.100 temporarily and launch the IPSearch software.
    • Once you find the device (default IP is 192.168.0.129), you can use a browser and log in with "admin/admin" and get into the Network section to change the IP address.
  3. At the NVR, verify the WAN and the VIN/Advanced Setup are on two different network schemes.
  4. At the PVM, verify the IP address scheme matches the VIN/Advanced Setup network scheme.
  5. At the NVR go through camera registration and register the PVM.
  6. Set up a keyboard on the PVM itself and pull up the camera from there.

 

Was this article helpful?

Bu bilgiler sorununuzu çözmeye yardımcı oldu mu?

Still need help?

Uzman ekibimiz size yardımcı olmak için burada.

New Ticket