Annke Sight - How to Add a Camera to NVR with an Ethernet Cable?（For N48WHR New UI）

Applies to: N48WHR New UI

Purpose:
The wireless NVR should be connected to the IP camera to acquire and record video. If the wireless connection to the ip camera fails, you can use the ethernet cable method to connect the camera to the nvr.

1. Please connect the camera to the LAN port of your wifi router using an Ethernet cable, and please connect the camera to an outlet with a power supply.

Then please connect the NVR to the LAN port of your wifi router (same router with the camera) via an Ethernet cable or connect the NVR to the wifi of your wifi router (same router with the camera). Then please connect the NVR to the socket with a 12v2a power supply. 

2. Please right-click the mouse and click camera, then go to camera set up and click add camera. Then you can accsess Power the Cameras page.

3. You can also add camera to NVR in the method below.

Please click plus icon to add camera in a channel that are not connecting with the camera. Then you can access the same page above to power the cameras. Then please click Manually to connect the cameras.

4. Please click search to find the cameras and then click plus icon to add cameras. Then you can see the camera's status shows "Connect success" in the chart below.

Please note that the ip address of the camera is 192.xxx.x.xx, which means a wired connection.

5. Now, you can see the camera's image on the TV or monitor.

Please note that the ethernet cable connecting the camera to the wifi router cannot be disconnected after the successful connection.