Annke Vision - How to Set up Email Alert? (AI Detection DVR)

Applies to:
DW81KD/DW61LD/S500/S300/FC200

Purpose:

You could set up an email alert to receive emails when the motion detection of ANNKE DVR is triggered.

Here are the steps:

1. Please use the Gmail address, not Yahoo nor Hotmail.

2. Check system P2P status and make sure it is online.  Log into the Annke DVR system on a connected TV/monitor, navigate to System-->Network-->Advanced--Platform Access to check the P2P status.
   Note: If the status is 'Offline,' please refer to this instruction to make it online at first:
   What to do if P2P status shows offline? (DW81KD New Series)

3. Log in Google account, go to 'Security', then turn on '2-Step Verification'.

   

    

   4. search'app password'

   

   
4. 

5. On the DVR, navigate to the System--Network--Advanced--Email and set up like the picture below:
   Tick on Enable Server Authentication
   Email Address is your Gmail address
   Email Password is the 16-digit App password from your Google account
   SMTP Mode is General
   SMTP port is 587 or 465
   Tick on Enable SSL/TLS
   Sender can be any text
   Sender's address is your Gmail address
   Select Receivers from the drop-down list
   The Receiver can be any name
   The Receiver's Address can be your Gmail account or any email you want to receive the email notification
   Tick on Enable Attached Picture
   Click Apply
   After the above, click Test on this screen.
   When you see the test succeeded, we can go ahead for the below steps.
   If the test failed, please double-check the input options on this screen and try again.

6. Link motion detection with email alert
   Navigate to System--Event--Normal Event--Motion Detection, follow the steps on below picture to enable motion detection and Notify Surveillance Center. Then you will receive a notification via email when there is motion detection on the system.
   

    

   If you still cannot receive the notification, please contact support@annke.com.