How to enable audio recording (SwannView Link and AlwaysSafe)?

Super Admin
07 May 2026
7 views
DVR16-1000, DVR4-1250, DVR8-1250, DVR4-1260, DVR8-1260, DVR4-1425, DVR8-1425, DVR9-1425, DVR12-1425, DVR16-1425, DVR8-1450, DVR4-1580, DVR8-1580, DVR4-2555, DVR8-2555, DVR8-2900, DVR4-3000, DVR8-3000, DVR16-3000, DVR8-3200, DVR16-3200, DVR4-3250, DVR8-3250, DVR16-3250, DVR8-3260, DVR4-3425, DVR8-3425, DVR16-3425, DVR4-3450, DVR8-3450, DVR4-4000, DVR8-4000, DVR16-4000, DVR4-4100, DVR8-4100, DVR4-4150, DVR4-4200, DVR8-4200, DVR9-4200, DVR16-4200, DVR4-4400, DVR8-4400, DVR16-4400, DVR4-4550, DVR8-4550, DVR16-4550, DVR4-4600, DVR8-4600, DVR4-4750, DVR8-4750, DVR8-5000, HDR6-8000, HDR6-8100, HDR4-8200, NVR4-7072, NVR8-7072, NVR4-7082, NVR8-7082, NVR4-7085, NVR8-7085, NVR4-7285, NVR8-7285, NVR4-7300, NVR8-7300, NVR16-7300, NVR4-7400, NVR8-7400, NVR16-7400, NVW-1080H, NVW-460, NVW-480, NVW-490

Enable "Record Audio"

  1. Access Menu then go to Recording then Encode.
  2. Change the Camera No. to where your microphone is connected (e.g. channel 1).
  3. Set Encoding Parameters to Main Stream.
  4. Click on the box beside Record Audio, it will fill white.
  5. Click on Apply to save the settings.
  6. Set Encoding Parameters to Substream.
  7. Click on the box beside Record Audio, it will fill white.
  8. Click on Apply to save the settings.
  • Repeat the steps for other channels that you want to enable audio on.
  • Certain recorders assign audio inputs to fixed channels. Make sure that the camera you wish to associate with the audio input is connected to the right channel.

Was this article helpful?

Bu bilgiler sorununuzu çözmeye yardımcı oldu mu?

Still need help?

Uzman ekibimiz size yardımcı olmak için burada.

New Ticket